Indoor Dust Exposure Detection System For Air Purifier Controller Based Arduino And LabVIEW

Main Article Content

Indah Nursyamsi Handayani
Mamurotun Mamurotun

Abstract

Dust is a very small solid particle (generally in units of micron) carried by air so it can be breathed anywhere either outdoors or indoors. According to the decision of kepala badan pengendalian dampak lingkungan number: Kep-107/Kabapedal/11/1997, dust exposure is one of the indicators of air pollution affecting the quality of life and public health. Therefore, a system capable of detecting and controlling the level of dust exposure is required. In this study a dust-proof detection was designed using the GP2Y1010AUOF sensor as a dust or particulate matter (PM10) and DS18B20 sensor which is a digital temperature sensor to monitor room temperature. As a simulation of air neutralization used mini car home dual use usb humidifier water-drop air purifier aroma diffus, Arduino Uno as Master Control Unit (MCU) which functions to manage data sensor readings into digital data and to display the level of exposure of dust and air temperature of the room is used LCD character 16x2. A graphical and numerical display of data is displayed on a computer or laptop using graphical user interface LabVIEW.

Article Details

How to Cite
1.
Handayani I, Mamurotun M. Indoor Dust Exposure Detection System For Air Purifier Controller Based Arduino And LabVIEW. SANITAS [Internet]. 31Oct.2019 [cited 12Dec.2019];10(1):46-8. Available from: https://sanitas.e-journal.id/index.php/SANITAS/article/view/20191001-handayani
Section
Full Research Article
Author Biographies

Indah Nursyamsi Handayani, Poltekkes Kemenkes Jakarta II

Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Jakarta II,

Teknik Elektromedik, Poltekkes Kemenkes Jakarta II,

Jl. Hang Jebat III/F3 Kebayoran Baru, Jakarta Selatan, 12140

Mamurotun Mamurotun, Politeknik Kesehatan Kemenkes Jakarta II

Jurusan Teknik Elektromedik, Politeknik Kesehatan Kemenkes Jakarta II,

Teknik Elektromedik, Poltekkes Kemenkes Jakarta II,

Jl. Hang Jebat III/F3 Kebayoran Baru, Jakarta Selatan, 12140

References

Rizky Nelar Lesmana, dkk. “Membangun Sistem Pemantau Kualitas Udara Dalam Ruangan Dengan Mengaplikasikan Sensor CO, O3, PM10 Berbasis LabVIEWs”, Jom FTEKNIK Volume 3 NO.2 Oktober 2016.

Kiky Aunillah, Yolanda Ardam, “Hubungan Paparan Debu dan Lama Paparan Dengan Gangguan Faal Paru Pekerja Overhaul Power Plant”, The Indonesian Journal of Occupational Safety and Health, Vol. 4, No. 2 Jul-Des 2015

Hye-Kyung Park , MD, PhD,Kai-Chung Cheng , PhD,Afua O. Tetteh , PhD,Lynn M. Hildemann , PhD &Kari C. Nadeau , MD, PhD, “Effectiveness of air purifier on health outcomes and indoor particles in homes of children with allergic diseases in Fresno, California: A pilot study” Pages 341- posted online: 10 Oct 2016, Published online: 01 Nov 2016

Latar Muhamad Arief, Ir.MSc, “Lingkungan Kerja Debu”, Fakultas Ilmu-Ilmu Kesehatan Program Studi Kesehatan Masyarakat, Peminatan Keselamatan dan Kesehatan Kerja Univ. Esa Unggul. 2012

Dian Artanto, “Interaksi Arduino dan LabVIEW,” Elex Media Komputindo: Jakarta, 2012.

Siswo Wardoyo, S.T., ., Anggoro Suryo Pramudyo, “Mikrokontroler dan Aplikasi pada Arduino”, Teknosain:Jakarta. 2012

Sharp Corporation. 2006. Datasheet GP2Y1010AU0F Compact Optical DustSensor. 1 Desember 2015.